Everyone

IKARUS Projects

KitKat

This is an Android NFC-App for reading, writing, analyzing, etc. Mifare Classic RFID-Tags.

GENERAL INFORMATION

This tool provides several features to interact with (and only with) Mifare Classic RFID-Tags.

It is designed for users who have at least basic familiarity with the Mifare Classic technology.

┏━┫ PLEASE READ ┣━

┃Please read the whole page and make sure you got everything right before rating. Thank you!

┃If you rate with less then 4 stars, please leave a comment why. This way I can improve this app.

┃If you like MCT please consider to buy the donate version.

┗━

FEATURES

• Read Mifare Classic tags

• Save and edit the tag data you read

• Write to Mifare Classic tags (block-wise)

• Clone Mifare Classic tags

(Write dump of a tag to another tag; write 'dump-wise')

• Key management based on dictionary-attack

(Write the keys you know in a file (dictionary). 

MCT will try to authenticate with these

keys against all sectors and read as much as possible.)

• Format a tag back to the factory/delivery state

• Write the manufacturer block of special Mifare Classic tags

• Create, edit and save key files (dictionaries)

• Decode & Encode Mifare Classic Value Blocks

• Decode & Encode Mifare Classic Access Conditions

• Compare dumps (Diff Tool)

• Display generic tag information

• Display the tag data as highlighted hex

• Display the tag data as 7-Bit US-ASCII

• Display the Mifare Classic Access Conditions as a table

• Display Mifare Classic Value Blocks as integer

• In-App (offline) help and information

• It's open source (GPLv3) ;)

IMPORTANT NOTES

Some important things are:

• The features this tool provides are very basic. There are no such

fancy things like saving a URL to an RFID-Tag with a nice looking

graphical user interface. If you want so save things on a tag,

you have to input the raw hexadecimal data.

• This App can NOT crack/hack

any Mifare Classic keys. If you want to read/write an RFID-Tag, you

need keys for this specific tag first. For additional information

please read/see Getting Started from the links section.

• There will be no "brute-force" attack

capability in this application. It is way too slow due

to the protocol.

• The first block of the first sector of an original

Mifare Classic tag is read-only i.e. not writable. But there

are special Mifare Classic tags that support writing to the

manufacturer block with a simple write command. This App is able to

write to such tags and can therefore create fully correct clones.

However, some special tags require a special command sequence

to put them into the state where writing to the manufacturer block is possible.

These tags will not work.

Remember this when you are shopping for special tags!

• This app will NOT work on some devices because

their hardware (NFC-controller) does not support Mifare Classic

( <a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://github.com/ikarus23/MifareClassicTool/issues/1%26sa%3DD%26usg%3DAFQjCNH_aMyrd5PTedO7H4CyYXZQHpg37w&sa=D&usg=AFQjCNGYGRMX1T0DSBy16DLww6eXY5cSbQ" target="_blank">https://github.com/ikarus23/MifareClassicTool/issues/1</a> ).

You can find a list of unsupported devices here:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://github.com/ikarus23/MifareClassicTool%2523general-information%26sa%3DD%26usg%3DAFQjCNEFGeDb_4SgLf2tAaHAJ_1oSE2mZQ&sa=D&usg=AFQjCNE_Ri5mFz4HV8n1CcUJukpWqQuVAw" target="_blank">https://github.com/ikarus23/MifareClassicTool#general-information</a>

LINKS

• Project Page on github:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://github.com/ikarus23/MifareClassicTool%26sa%3DD%26usg%3DAFQjCNE6uC74ZUkx5a9ZnxBoq-XGvmDoNg&sa=D&usg=AFQjCNFJ-9M34r8V4LNk3Tjn4atXi3LgLQ" target="_blank">https://github.com/ikarus23/MifareClassicTool</a>

• MifareClassicTool on F-Droid:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://f-droid.org/repository/browse/?fdid%253Dde.syss.MifareClassicTool%26sa%3DD%26usg%3DAFQjCNGcgRVI2BIPTOqZmz8WPC-XZSMjcw&sa=D&usg=AFQjCNFfc5yhhlepaKrZN_BCJ8kK6ZzONw" target="_blank">https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool</a>

• Getting started & other help:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://github.com/ikarus23/MifareClassicTool%2523getting-started%26sa%3DD%26usg%3DAFQjCNEz04CtmkHQCeohMIfarzGkSQtOsg&sa=D&usg=AFQjCNEliTBsaTNn8g4L7OSfho9jYpXxoA" target="_blank">https://github.com/ikarus23/MifareClassicTool#getting-started</a>

• Bug tracker:

IF YOU ENCOUNTER A PROBLEM PLEASE REPORT IT HERE

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttps://github.com/ikarus23/MifareClassicTool/issues%26sa%3DD%26usg%3DAFQjCNEFFWQ0tNlBzLYeqLSwCLOV1bP2_w&sa=D&usg=AFQjCNFD7V6BPjUi8vYO_6ERywtZcyDUQw" target="_blank">https://github.com/ikarus23/MifareClassicTool/issues</a>

• Additional stuff:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttp://publications.icaria.de/mct/%26sa%3DD%26usg%3DAFQjCNEAl0naeZgORNL6qXt6Gd2wZUtYZg&sa=D&usg=AFQjCNGJDC2VZXH8en9Pa1AtLandu5xwZw" target="_blank">http://publications.icaria.de/mct/</a>

• Thread at the Proxmark3 Forum:

<a href="https://www.google.com/url?q=https://www.google.com/url?q%3Dhttp://www.proxmark.org/forum/viewtopic.php?id%253D1535%26sa%3DD%26usg%3DAFQjCNGhUOxCUcBWf5Xntp53ZlKlrHSZug&sa=D&usg=AFQjCNGKgHGovyYKx8UZ_XrykHTxVm2sEQ" target="_blank">http://www.proxmark.org/forum/viewtopic.php?id=1535</a>

MIFARE is a registered trademark of NXP Semiconductors.

</div> <div jsname="WJz9Hc" style="display:none">这是一个Android NFC的应用为阅读，写作，分析等MIFARE经典的RFID标签。

一般信息

此工具提供多种功能进行交互（和只有的带）MIFARE经典的RFID标签。

它是专为谁拥有至少与MIFARE经典技术基本熟悉的用户。

┏━┫请仔细阅读┣━

┃Please阅读整个页面，并确保你的评价权之前得到的一切。谢谢！

┃If你不到4星评级，请发表评论为什么。这样我可以改善这个应用程序。

┃If你喜欢MCT请考虑购买捐赠的版本。

┗━

功能

•读取MIFARE经典标签

•保存和编辑您读取标签数据

•写入MIFARE经典标签（逐块）

•克隆MIFARE经典标签

（标签到另一个标签中写入垃圾;写“转储明智'）

•密钥管理基于字典的攻击

（写在一个文件中（字典你知道键）。

MCT将尝试与这些验证

针对各界键和阅读尽可能多的。）

•格式的标记恢复到出厂/交付状态

•写特殊的MIFARE经典标签的制造商Block

•创建，编辑和保存密钥文件（字典）

•解码和编码的Mifare经典值块

•解码和编码的Mifare经典准入条件

•比较转储（DIFF工具）

•显示通用标签信息

•显示标签数据所强调的十六进制

•显示标签数据作为7位US-ASCII

•显示MIFARE经典准入条件为表

•显示MIFARE经典超值块作为整

•在应用内（离线）帮助和信息

•它是开源（GPL第三版）;）

重要提示

一些重要的事情是：

•这个工具提供的功能非常基本。没有这样

花哨的东西像保存URL到RFID标签用一个好看的

图形用户界面。如果你想的那么保存在标签上的东西，

你要输入的原始十六进制数据。

•这个程序可以不会破解/黑客

任何MIFARE经典按键。如果你想读/写RFID标签，你

需要为这个特定的标签第一项。有关其他信息

请阅读/看使用从链接部分入门。

•将有否];强力＆QUOT;攻击

能力在本申请中。这是太缓慢，由于

到的协议。

•的第一个扇区的第一个块一个的原始的

MIFARE经典标记为只读，即不写。但是，

是特殊的MIFARE经典支持写入标签

制造商块用一个简单的写命令。这个应用程序能够

写这样的标签，因此可以创建完全正确的克隆。

然而，一些特殊标签要求特殊命令序列

将它们放到哪里写入厂家块的状态是可能的。

这些标签将无法工作。

记住这一点，当你购买特殊的标签！

•这个程序将不会在某些设备上工作，因为

其硬件（NFC控制器）不支持MIFARE经典

（<a href="https://www.google.com/url?q=https://github.com/ikarus23/MifareClassicTool/issues/1&sa=D&usg=AFQjCNH_aMyrd5PTedO7H4CyYXZQHpg37w" target="_blank">https://github.com/ikarus23/MifareClassicTool/issues/1</a>）。

你可以在这里找到不支持的设备列表：

<a href="https://www.google.com/url?q=https://github.com/ikarus23/MifareClassicTool%23general-information&sa=D&usg=AFQjCNEFGeDb_4SgLf2tAaHAJ_1oSE2mZQ" target="_blank">https://github.com/ikarus23/MifareClassicTool#general-information</a>

链接

•项目页面在GitHub上：

<a href="https://www.google.com/url?q=https://github.com/ikarus23/MifareClassicTool&sa=D&usg=AFQjCNE6uC74ZUkx5a9ZnxBoq-XGvmDoNg" target="_blank">https://github.com/ikarus23/MifareClassicTool</a>

•MifareClassicTool对F-Droid的：

<a href="https://www.google.com/url?q=https://f-droid.org/repository/browse/?fdid%3Dde.syss.MifareClassicTool&sa=D&usg=AFQjCNGcgRVI2BIPTOqZmz8WPC-XZSMjcw" target="_blank">https://f-droid.org/repository/browse/?fdid=de.syss.MifareClassicTool</a>

•入门及其他帮助：

<a href="https://www.google.com/url?q=https://github.com/ikarus23/MifareClassicTool%23getting-started&sa=D&usg=AFQjCNEz04CtmkHQCeohMIfarzGkSQtOsg" target="_blank">https://github.com/ikarus23/MifareClassicTool#getting-started</a>

•错误跟踪：

如果您遇到问题，请告诉我们

<a href="https://www.google.com/url?q=https://github.com/ikarus23/MifareClassicTool/issues&sa=D&usg=AFQjCNEFFWQ0tNlBzLYeqLSwCLOV1bP2_w" target="_blank">https://github.com/ikarus23/MifareClassicTool/issues</a>

•其他的东西：

<a href="https://www.google.com/url?q=http://publications.icaria.de/mct/&sa=D&usg=AFQjCNEAl0naeZgORNL6qXt6Gd2wZUtYZg" target="_blank">http://publications.icaria.de/mct/</a>

•线程在Proxmark3论坛：

<a href="https://www.google.com/url?q=http://www.proxmark.org/forum/viewtopic.php?id%3D1535&sa=D&usg=AFQjCNGhUOxCUcBWf5Xntp53ZlKlrHSZug" target="_blank">http://www.proxmark.org/forum/viewtopic.php?id=1535</a>

MIFARE是NXP半导体公司的注册商标。




</div> <div class="show-more-end">

Mifare Classic Tool - MCT

Mifare Classic Tool - MCT的最新版本

其他版本